CASHMERE KUSH Fragrance Oil 50 ml

From the Servus workshop: what it is

CASHMERE KUSH #EU41509F is a liquid fragrance oil from the woody family, made by French Color & Fragrance International GmbH (Germany), in a 50 ml bottle. Read from the composition, it's a soft woody scent: OTNE (Iso E Super) — 30.4% of the scent in the allergen report and in the IFRA certificate — gives the ambery, velvety wood; Cedramber and Sandela bring cedar and sandalwood, the methyl ionones a powdery shade, vanillin rounds off the base, and ethylene brassylate and musk ketone — the musk. At the top, bergamot oil, linalyl acetate and linalool give a fresh, aromatic opening.

Sînziana says: “Cashmere Kush is the soft woody one — ambery wood, sandalwood, a touch of powder and musk. Temperature isn't its problem, the flash point is above 93 degrees. What I watch is the percentage: in the reed diffuser the ceiling is 7.89%, and on hands and face it drops below 3%.”

Behaviour in production

Temperature isn't its problem. The flash point on the data sheet is above 93 °C, above the temperature at which most waxes are scented. You add it at the fragrance-adding temperature on your wax's data sheet, stirring slowly.

The percentage comes from the table, not from habit. In a candle the ceiling is 100%, but in the reed diffuser it is 7.89%, in soap also 7.89%, and on hands and face it drops below 3% — 2.50% in hand cream, 1.84% in face cream. A diffuser recipe with 10% of another scent doesn't carry over to this one.

Hands call for gloves. The data sheet classifies the mixture as irritating to skin (H315) and as a skin sensitiser (H317). You weigh it wearing gloves, and if it gets on your skin you wash with plenty of water.

It doesn't go down the sink. The data sheet gives it H410 — very toxic to aquatic life with long lasting effects. Leftovers, cloths and empty containers go to a collection point, not down the drain.

With a new batch, test before the big production run. Note the batch number on the label, the wax, the percentage, the wick and the container, then compare on a small piece, on your final recipe.

Dosage by application: how you build a collection

With the same scent you make a candle, soap, room spray, diffuser or cream — but each product has its own ceiling from the scent's IFRA certificate (Amendment 51, issued 8 August 2026):

The label for your reed diffuser with Cashmere Kush, on a Diffusol M base, you get from the calculator.

(The figures are rounded down, to two decimal places; the certificate gives them to eight. A safety limit is never rounded up.)

Read it like this: in a candle, the wax stops you, not the certificate. In a room spray you have room up to 21.71%, but in soap and in the reed diffuser you stop at 7.89%. On the skin the ceilings drop fast: 16.77% in body cream, 2.50% in hand cream, 1.84% in face cream.

Candles: the real ceiling comes from your wax's data sheet. In our formulas: 6–8% in containers, 5–6% in moulds, 4–6% in figurines, and the first scented candle starts from 5%. Weighed, not counted in drops — the density is ≈ 1.05, so 50 ml ≈ 52.5 g, which is enough for about 875 g of wax at 6%. Added at the fragrance-adding temperature on the wax's data sheet, stirred slowly for a minute or two.

Soap and cosmetics: keep to the ceiling of the exact category in the table. For soap the ceiling is 7.89%; in the workshop we work at 1–3%. For your product's label, the scent's allergen report is under Download, on this page — on the extended list, with 18 entries present, OTNE at the top, at 30.4%.

A complete system — what you pour together with the scent: for candles, container wax or wax for moulds, the right wick and liquid dye. For soap and cosmetics: cosmetic bases and soap colourant. For volumes and stock continuity, Servus Club.

Stated limits

It is NOT for lips, toys, toothpaste or mouthwash — IFRA restricts it to 0% (Cat 1 and Cat 6).

It does NOT go above 7.89% in the reed diffuser or in soap — that is the scent's IFRA ceiling for these products.

It does NOT have the same ceiling everywhere — on the skin it drops below 3% for hands and face, and to 0.62% for baby products. The percentage comes from your product's row, not from the candle recipe.

It is NOT an essential oil and it is NOT natural — it is a perfumery composition, with bergamot, lemon and lime oils in the formula, in small amounts.

How to read IFRA limits in practice: IFRA fragrances for candles — how much you're allowed vs. how it burns. How much to add, when to add it and why sometimes you can't smell it: fragrance oil for candles.

What to check on your recipe: how strongly it comes through cold and when burning in your wax, at your percentage · whether it changes the shade of white wax (the liquid is pale yellow to amber) · the wick on your diameter at the final percentage. Before the big production run, a small piece.

Technical properties

Behaviour per recipe (how strongly it comes through in each wax, the final shade) is set by testing — it isn't in the documents.

Step-by-step guide

1. Check the IFRA limit for your application (the table above) — for the reed diffuser and for soap, 7.89%; on the skin, below 3% for hands and face.
2. Weigh it, wearing gloves: 50 ml ≈ 52.5 g. At low percentages, the scale beats the measuring cup.
3. For candles, add it at the fragrance-adding temperature on your wax's data sheet; stir slowly for a minute or two.
4. For soap and cosmetics, download the allergen report and write the label from it.
5. Test small — one piece on the final recipe, judged after two days: the scent cold, when burning, the colour.

Servus Collection

Since 2010, from craft to real distribution.

We sell selected materials, tested and explained from real workshop experience. From Maramureș, for workshops in Romania and Europe.

Servus. See you at the pouring table.